Dust removal method and selection of engineering machinery diesel engine

release time：2018-11

After a period of operation of the diesel engine, in the combustion chamber, intake and exhaust valves, into the exhaust manifold and exhaust pipe to produce incompletely burned carbon deposits; due to oil and oil and natural gas evaporation of a layer of oil, some parts of the surface It will be stored; for water-cooled diesel engines, the cooling water will condense into a certain scale in the cavity. Too much of these wastes will increase the performance of the diesel engine, increase fuel consumption, high temperature, and normal damage to the gap, accelerate wear and corrosion of the parts, and even cause some malfunctions. Therefore, it is necessary to keep the dirt clean. In addition, in the maintenance of diesel engines, it is also necessary to remove carbon deposits, oil and scale to reduce the diesel engine failure rate, extend the service life, and maintain a good working condition. After the diesel engine works for a period of time, in the combustion chamber, intake valve and exhaust Doors, entering the exhaust manifold and exhaust pipe to produce incompletely burned carbon deposits; some parts of the surface will be stored as oil and oil and natural gas evaporate a layer of oil; for water-cooled diesel engines, the cooling water will be empty The chamber is condensed into a certain scale. Too much of these wastes will increase the performance of the diesel engine, increase fuel consumption, high temperature, and normal damage to the gap, accelerate wear and corrosion of the parts, and even cause some malfunctions. Therefore, it is necessary to keep the dirt clean. In addition, in the maintenance of diesel engines, it is also necessary to remove carbon deposits, oil and scale to reduce the diesel engine failure rate, extend the service life, and maintain a good working condition. After the diesel engine works for a period of time, in the combustion chamber, intake valve and exhaust Doors, entering the exhaust manifold and exhaust pipe to produce incompletely burned carbon deposits; some parts of the surface will be stored as oil and oil and natural gas evaporate a layer of oil; for water-cooled diesel engines, the cooling water will be empty The chamber is condensed into a certain scale. Too much of these wastes will increase the performance of the diesel engine, increase fuel consumption, high temperature, and normal damage to the gap, accelerate wear and corrosion of the parts, and even cause some malfunctions. Therefore, it is necessary to keep the dirt clean. In addition, in the maintenance of diesel engines, it is also necessary to remove carbon deposits, oil and scale to reduce the diesel engine failure rate, extend the service life, and maintain a good working condition..